The modulus of elasticity, or Young's modulus, is the ratio of stress to strain within the elastic range and is the slope of the straight part of the stress-strain curve. A high modulus means a stiff material that deforms little under load, such as a cobalt-chromium partial denture framework or enamel; a low modulus means a flexible material, such as an elastomeric impression material or a nickel-titanium wire. Stiffness is independent of strength: a material can be strong but flexible or stiff but brittle. Option B, the proportional limit, is the greatest stress a material can take without departing from proportionality between stress and strain, in practice the onset of permanent deformation. Option C, resilience, is the energy absorbed per unit volume up to the proportional limit, the area under the elastic part of the curve, and matters for orthodontic wires. Option D, ductility, is the ability to be drawn into wire without fracture and is measured as percentage elongation. Exam tip: modulus is the slope, proportional limit is the point where the line bends, and the area under the line is resilience.